24B Station Master Pro™ -

Tempo continues its excellence in irrigation system troubleshooting with the introduction of the new Model 24B Station Master Pro. The upgraded Station Master Pro is a portable, battery-operated irrigation system diagnostic tester combining solenoid activation and wire identification. The easy-to-understand LEDs notify the technician if sufficient voltage is being supplied by the controller and the condition of the solenoid. The solenoid activation mode is used to activate valve solenoids either from the controller or at the valve, along with testing continuity of the solenoids. In chatter mode the Station Master Pro will turn the solenoid off and on about once per second to aid in locating the valve by ear. In addition, the Station Master has the added functionality of providing tone generation to identify wires which can be traced with any Tempo 200 Series inductive amplifier. The Model 24B operates on two 9 volt alkaline batteries and can safely hold open a working solenoid for hours. The test leads come equipped with premium "bed-of-nails" and piercing pin bent nose clips for use on insulated wires, allowing the technician to connect the unit without cutting or stripping the wires. The unit is housed in a high impact ABS plastic case designed to withstand the rigors of daily use in the field. [Press Release]

521A Wire and Valve Locator -

The new and improved 521A Wire and Valve Locator builds on the success of the industry-standard Model 521. The new 521A has added features such as: loudspeaker listening, an extended locating wand for comfort, a slimmer case and a switch to easy-to-find "D" cell transmitter batteries. Like its predecessor, the 521A combines adjustable transmitter power with a sensitive locating receiver to allow location of buried wires and valves with speed and confidence. [Press Release]

CM-410 400A AC Clamp-on Meter -

Greenlee proudly introduces the addition of CM-410 to the clamp-on meter family. Ergonomically designed and affordably priced, the CM-410 carries a UL Cat III 600V rating and has a measuring capability up to 400 amps AC and 600 volts AC/DC. Filled to capacity with features, the CM-410 also includes: resistance measurement up to 20M ohms, data hold, auto power off, and continuity check. [Press Release]

TK-30IR Low Voltage Electrical Kit -

Specially developed for irrigation systems and other low voltage applications, Greenlee’s new TK-30IR Low Voltage Electrical Kit includes three popular products: the DM-20 manual ranging multimeter, GT-10GFI circuit tester, and GT-15 non-contact low voltage detector. These popular test instruments come with a durable carrying case for convenient storage and additional protection. The TK-30IR is great for checking low voltage applications such as irrigation, low voltage lighting and thermostats; testing and troubleshooting GFCI receptacles, and sensing the presence of AC voltage (ranges from 12 to 90 V AC), etc. [Press Release]

CSJ-100 AC Open Jaw Clamp Meter -

Introducing Greenlee’s first open jaw clamp meter – the CSJ-100. The CSJ-100 carries a Cat IV 600V / Cat III 1000V rating and has a measuring capability up to 200 amps AC. The sleek, ergonomic body design and non-contact voltage detection (EF) function makes it the ultimate tool for electricians who are seeking quick verification of amperage or voltage—especially in tight spaces. The CSJ-100 has a jaw opening that accommodates up to 0.63" diameter conductors. Its detachable test leads fit in the back of the tester, allowing for effortless measurement and storage. [Press Release]

Hand Tool Product Line -

You've always known Greenlee as the premier source for professional grade tools and testing equipment, offering a complete line of every type of tool for the electrical contractor - from knockout punches and cable pullers to benders and electrical test instruments. For more than 145 years, Greenlee has been recognized as a market leader, working to further extend our product line and design new tools that help make your job faster, safer and easier. That means continuing to provide our customers with Greenlee-branded tools you'll reach for every day. [Press Release]

722 Steel Cable and Wire Rope Cutter -

The new Greenlee 722 cutter is designed specifically to cut small diameter steel wire and wire rope, including aircraft cable. The blades are made from forged steel and are hardened specifically to cut steel. The 722 is less than 8" (200 mm) long and it weighs only ¾ lb. (0.34 kg), so it’s very handy to use and fits easily in a tool pouch. [Press Release]

Glo Stix and Fish Stix -

Greenlee’s Glo Stix are manufactured from luminescent 3/16" or 5/32" diameter fiberglass rods that glow in the dark. The Glo Stix make installation of electrical, voice, data, video, and security wires easier in dark spaces such as above ceilings, below subfloors, and inside walls. The 3/16" and 5/32" diameter are more flexible for going around corners in tight places. Greenlee’s Fish Stix are manufactured from green 1/4" diameter fiberglass rods. The 1/4" diameter Fish Stix are relatively stiff to span longer unsupported distances. All of the rods (except the 540-6) have sturdy steel threaded connectors on each end. The threads are the same on all rods, so different diameter rod sections can be combined easily for specific situations. Each Fish Stix and Glo Stix kit includes a bullet nose tip for pushing through insulated walls, under floors or above ceilings. The 540-15, 540-12 and 540-24 also include a hook tip for hooking wires and pulling them into position. [Press Release]

New Packages for 6001 and 640 Cable Pullers -

For the 6001 puller, the 6003, 6000, and 6006 puller packages are being discontinued. These are being replaced by new packages 6004 and 6005. For the 640 puller, the 676 and 686 puller packages are being discontinued. These are being replaced by new packages 643 and 645. [Press Release]

459 Light Base Sheave -

Pulling wires into parking lot light bases can be difficult and tiring. It often requires one person to stand on the light base and pull up on the pulling rope and another person to guide the wires into the conduit on the feeding end. If you want to make this task faster and easier, the 459 may be the product you need. The 459 attaches to light bases using the same mounting bolts that are used for the light pole. Simply remove the nuts from three of the pole mounting bolts, set the 459 over the bolts and then reinstall the nuts. The 459 has mounting slots so it will work with bolt circles from 7.8" (198 mm) diameter through 14.8" (376 mm) diameter. The 459 improves the pulling operation on both the pulling and feeding ends. On the pulling end, the pulling rope goes over the sheave so a person standing on the ground can pull the rope horizontally. On the feeding end, the 459 guides the wires directly over the center of the bolt square into the conduit, usually eliminating the need for a person. [Press Release]

CCX Series - E12CCX and C12CCX -

Get more for your money and carry fewer tools – with CCX. The new E12CCX and C12CCX tools expand and increase the capability of the only cutting, hole punching and crimping multifunction tool system available today. This advanced line of multipurpose tools is designed to work with a wide variety of cutting blades and crimping die adapters, and a knockout punch adapter. Buy just one tool for countless electrical construction and maintenance jobs. [Press Release]

FP3 - 3' Fish Pole/Cable Reacher -

When you are pulling wires or cables over suspended ceilings or under sub-floors, you often need just a little more reach. That’s when the new Greenlee FP3 Fish Pole comes in handy. The FP3 is a telescoping pole that extends to 3' long, but it collapses when you aren’t using it to only 6-3/8" (162 mm) long. It even has a clip to hold it in a shirt or jacket pocket. The working end of the FP3 has a hook that is perfect for grabbing cables that are 3/4" (19 mm) or less in diameter. [Press Release]

ETS8 Cable Tray Cutter -

Tired of using bolt cutters to cut wire mesh cable tray? Is the effort to close the handles starting to result in repetitive motion injuries? Does it slow you down trying to get the large head of the bolt cutter into the right position? If your answer to any of these questions is yes, the new Greenlee ETS8 battery-powered cable tray cutter may be the tool you need. The ETS8 cuts fast. It only takes 2 seconds to cut 0.191" (4.9 mm) diameter cable tray wires. The ETS8 is also light weight, weighing only 3 lbs. (1.3 kg) so it’s easy to move from cut to cut. This is actually less than most bolt cutters, and allows the user to operate the tool with one hand while positioning the cable tray with the other hand. The cutting head of the ETS8 rotates 330° and is small, so it’s easy to get into the right cutting position. And, finally, you don’t need to worry about running out of battery power. [Press Release]

EK628 Battery Crimping Tool -

The EK628 from Greenlee represents a leap forward for battery-powered 6-ton crimping tools. Rather than weighing 8-10 pounds (3.5-4.5 kg), it weighs only 5 ½ pounds (2.5 kg). It’s even lighter than most manual crimping tools. And rather than having a pistol grip style, it’s small enough and light enough to be a straight tool. The flip open crimping head has been replaced by crimping jaws that open wide enough to easily fit around connectors. Rather than requiring two hands to operate, it leaves one hand free to hold and position the connector. Its straight design and slim profile are like an extension of your arm and won’t require extra open space in a panel to get on a connector. And with all of these advantages, the EK628 is UL and cUL classified with 7 popular brands of code color-coded lugs and splices. [Press Release]

EK12ID & CK12ID Dieless Crimping Tools -

The EK12ID is a battery-powered indent style dieless crimping tool. The CK12ID is a corded indent style dieless crimping tool. For copper and aluminum color coded lugs and splices, they have a range through 1000 kcmil. They are UL and cUL Classified with 8 brands of connectors and feature a flip-open style crimping head to easily get around large lugs and splices. With the EK12ID or CK12ID, completing a crimp is easy. Simply close and latch the head around the connector and then pull the trigger. The tool does the rest. When the crimp is complete, the ram retracts to signal the operator that the crimp is complete and to ready the tool for the next crimp. [Press Release]

L97 Mini-Magnet Laser Level -

The L97 Mini-Magnet Laser Level is the third in a series of Greenlee professional levels. The L97 Mini-Magnet Laser Level combines the handy "no-dog" feature with a laser. The laser projects a beam which helps to align objects, making a variety of applications easier including bending conduit, aligning a electrical panel box or plumbing metal cabinets. The L97 Mini-Magnet Laser Level provides the electrical worker with a variety of value-added features such as three rare-earth magnets and a compact size. Even with the compact size, the Greenlee L97 laser has a range of over 80 yards. The four vial design also makes this tool useful in nearly every application. The V-groove on top of the level provides for easy viewing of the four vials. For added convenience, offsets and calculations are permanently engraved onto the level. The L97 Mini-Magnet Laser Level is a great asset for any electrical worker! [Press Release]

CA1 Cable Anchor -

Introducing Greenlee’s new Cable Anchor™ — designed to save you time and effort by securing up to eight cables to wood studs and plates using only one nail. That’s a significant improvement when compared to traditional staples that typically secure only two cables. The Cable Anchor’s™ innovative holding fingers help prevent each cable, regardless of size, from going slack during installation. This unique feature provides a helping hand to the installer, making installations quick and professional. [Press Release]

DeWalt Heavy-Duty Jobsite Storage - (Data Sheet 3.6 MB)

Introducing the NEW Heavy-Duty Jobsite Storage Solutions by DeWALT®. These new storage boxes are Guaranteed Tough®, and have been designed with the same rugged dependability that makes DeWALT® products famous. Each box comes FULLY LOADED with features, making it an indispensable asset on the jobsite. [Press Release]

HKL-1232 12 Ton Crimping Tool - (Data Sheet 61K)

If you’re looking for an easy to operate and rugged 12-ton crimping tool, the HKL1232 is the tool you need. The HKL1232 has a 2-speed hydraulic pump that advances rapidly until it contacts the connector before shifting to a lower speed to complete the crimp. [Press Release]

KC12 and KA12 Twelve-Ton Crimping Dies -

Greenlee is pleased to introduce new crimping dies for use on copper and aluminum color-coded lugs and splices. These new dies produce a hexagonal crimp that is the style preferred by many customers. They may be used with all brands of 12-ton crimping tools that are designed to accept industry "U" style dies.

ES25 Battery-Powered ACSR Cable Cutter -

The new Greenlee ES25 makes the task of cutting tough ACSR and other steel reinforced cables quick and easy. Simply place the jaw opening around the cable, swing the cutting blade into place, and then pull the trigger. The ES25 does the rest. ACSR type cables through 636 kcmil can be cut with the ES25. The ES25 is capable of making approximately 50 cuts of Grosbeak or 120 cuts of Merlin on one battery charge. And the ES25 is fast. Each cut takes about 8 seconds or less. The forward/reverse lever and the trigger on the ES25 are all operated with one hand allowing the operator to position and steady the cable with the other hand. The rugged gear drive system assures long life and smooth operation. An integral circuit breaker protects the motor if the tool becomes overloaded. [Press Release]

UT2 Trailer Hitch Adapter -

Greenlee is pleased to introduce the trailer hitch adapter as an accessory for use with the UT2 cable puller. This adapter permits people to use a truck as the base for the UT2. The UT2 Trailer Hitch attaches to the UT2 main assembly and fits into the receiver of standard 2" trailer hitches. [(Press Release 57K)]

NETcat® Pro NC-500 Structured Wiring Troubleshooter - (Data Sheet 50K)

The NETcat® Pro is a digital tool for fast, accurate checking of cables, wiring and network service. Operated using a back-lit touch screen display, the Pro not only tests wiring continuity and proper pair allocation, but measures the length of cables and determines if network service is available. When used with the NC-510 Accessory Kit containing seven (7) expansion remote test modules, the NETcat Pro can uniquely test coax or twisted pair jacks from a central location eight (8) at a time. [Press Release] [Product Demo]

CMT-90 Auto-function TRMS Electrical Tester -

With the introduction of the CMT-90 Auto-function True RMS electrical tester from Greenlee, electrical workers have yet another reason to buy Greenlee. The new CMT-90 is a robust tester with mass electrical appeal. The CMT-90 builds on the success of auto-function technology. It’s capable of measuring AC and DC voltage, AC current, resistance and verifying continuity– all without having to use a selector dial.  However, in order to be used in all electrical environments, Greenlee’s CMT-90 has True RMS function. The True RMS function provides greater measurement versatility. Beyond the True RMS, Greenlee’s CMT-90 has an auto-illuminating function, so as the lighting within a work space dims, the backlight on the CMT-90 automatically illuminates. The electrical worker can focus on the task at hand and not be distracted with having to push a button or change the selector dial to a different function. [Press Release]

L107 Electrician's Torpedo Level -

The Greenlee L107 Electrician's Torpedo Level is the newest addition to the level category.  The L107 Electrician's Torpedo is useful in a variety of applications including aligning conduit, checking clearance for runs and aligning fixtures.  The L107 has four rare earth magnets which allow for hands-free use on metal surfaces. [Press Release]

NETcat® Micro NC-100 Digital Voice, Data and Video Wiring Tester - (Data Sheet 56K)

The NETcat® Micro is a device that verifies the integrity of both twisted pair and coaxial telecom cables. It uses high-speed digital technology to verify wiring continuity and check for the correct allocation of wire pairs, showing the results on a backlit display. [Press Release] [Product Demo]

Ultra Tugger 2 Cable Puller -

With the new Greenlee 2000 lb. Ultra Tugger® 2, you'll have the pulling force you need and can adjust to accommodate the job.  The new UT2 is lightweight and mobile on the jobsite, easily attaches to conduit with no loose parts and is self-contained with an integral motor designed specifically for cable pulling applications.  And, it's made in the U.S.A.  All of these features make the new Greenlee UT2 an easy choice when compared to the competition. [Press Release]

SF-420AC Stud Sensor -

Greenlee's SF-420AC Stud Sensor with AC detection finds wood and metal studs and joists behind walls, floors, and ceilings up to 1 - 1/2" inches (38 mm) deep and indicates the presence of energized AC voltage.  The SF-420AC Stud Sensor may be used in Stud Scan mode or DeepScan® mode.  Stud Scan mode is used for depths up to 3/4" (19 mm) and DeepScan® mode is used for depths up to 1 - 1/2" deep (38 mm) which provides the electrical worker with much needed versatility. [Press Release]

SF-530 Multiscanner -

The SF-530 Multiscanner has many of the same features of the SF-420AC but also includes a large, backlit LCD display for easy viewing in poorly lighted areas and metal finding capabilities.  The easy-to-understand, on-screen graphics add to the simplicity of this product.  The SF-530 Multiscanner finds copper and other non-ferrous metal up to 1 - 1/2" deep (38 mm) and ferrous metal, such as rebar, in concrete up to 3" deep (76 mm). [Press Release]

SF-780 Metal Locator -

The SF-780 Metal Locator has an advanced user interface which makes this metal locator one of the easiest to use.  The on-screen graphics provide the electrical worker with proximity, type of metal and depth of metal.  The SF-780 Metal Locator finds both ferrous and nonferrous metal and indicates depth up to 6 inches (152 mm deep).  Use the SF-780 Metal Locator to find rebar, metal pipes, conduit and plumbing before drilling into slabs, coring through floors, cutting open concrete walls or drilling to add rebar to slab joints. [Press Release]

Self-Feeding Spade Bits -

Whether you’re trying to drive, drill, punch or knock out holes, you’ve always known the name Greenlee is synonymous with holemaking. That’s because we consistently listen to the customer in order to bring new innovative holemaking products to market that are designed to make your job faster, safer and easier. Now, Greenlee’s developed the latest in spade bit technology. This design requires considerably less force to accomplish the hole, which reduces operator fatigue and increases user comfort. [Press Release]

CS-2072 and CS-2072K Circuit-Finding Tools -

Greenlee proudly introduces two new circuit breaker finders to the circuit testing family. The CS-2072 Circuit Breaker Finder and CS-2072K Circuit Breaker Finder Kit provide the electrical worker with two choices when seeking a product to identify circuit breakers. The CS-2072 Circuit Breaker Finder is a compact two piece design where the receiver conveniently snaps into the transmitter for easy storage. The CS-2072 Circuit Breaker Finder quickly and easily allows one person to determine which breaker controls a specific circuit. [Press Release]

CR25 Cable Roller Guide -

Greenlee’s new CR25 Cable Roller Guide was developed to help guide and protect network and other cables being installed by network and coax installers or electricians. CR25 Cable Roller Guides can be used to simplify and speed up Cat. 5, 5e, and 6 cable installations and installation of other small diameter cables such as coax, NM, and small THHN. [Press Release]

GT-10 and GT-10GFI Polarity Cubes -

Greenlee's new polarity cubes, GT-10 and GT-10GFI, are designed to work with typical 3wire NEMA 120 volt receptacles. Both testers are ergonomically designed to fit comfortable in the hand for hours of tireless troubleshooting. [Press Release]

GT-15 Non-Contact Low Voltage Detector -

The GT-15 noncontact voltage detector’s bright LED and audible alarm indicate the voltage is present. This detector meets all the requirements of the UL and has a safety rating of Category III, 300V AC. This rating is more than sufficient for most low voltage applications. The cushioning grip provides for hours of tireless use and the convenient pensize device easily fits into pockets or tool pouches. The GT-15 also has a Lifetime Limited Warranty. [Press Release]

570XL 850/1300nm LED Source -

Greenlee introduces its XL fiberTOOLS™ series of professional fiber optic instruments designed to accurately measure optical power levels and link loss on multimode and singlemode cabling networks. These full feature general purpose fiber optic instruments are easy to operate and economically-priced to outfit all technicians performing fiber optic installation and maintenance. [Press Release]

170XL Fiber Optic Visual Fault Finder - (Datasheet)

The XL fiberTOOLS™ are designed for the technician to perform installation and maintenance measurements on fiber optic cabling networks. The XL fiberTOOLS™ family consists of the following individual instruments: an optical power meter, an 850/1300nm LED sources and 1310/1550nm Laser sources, a Visual Fault Locator and complete Insertion Loss Test Sets.

560XL Fiber Optic Power Meter -

Greenlee introduces its XL fiberTOOLS™ series of professional fiber optic instruments designed to accurately measure optical power levels and link loss on multimode and singlemode cabling networks. These full feature general purpose fiber optic instruments are easy to operate and economically-priced to outfit all technicians performing fiber optic installation and maintenance. [Press Release]

580XL 1310/1550nm Laser Source -

The XL fiberTOOLS™ are designed for the technician to perform installation and maintenance measurements on fiber optic cabling networks. The XL fiberTOOLS™ family consists of the following individual instruments: an optical power meter, an 850/1300nm LED sources and 1310/1550nm Laser sources, a Visual Fault Locator and complete Insertion Loss Test Sets. [Press Release]

Retractable Saw Set -

Greenlee’s new Retractable Saw Set offers eight features in a competitively priced saw blade for electricians, plumbers, carpenter’s as well as sportsmen and campers. “We designed this Retractable Saw Set to combine quality, versatility, comfort and convenience all in one product,” said Brian Allison, product manager. “When it comes down to it, Greenlee offers the most features, with the best quality at one competitive price.” [Press Release]

K425K58 and K425KO Crimping Tools -

Greenlee expands its K425 overhead manual crimping tool line with the addition of two new tools. The K425K58 and the K425KO are designed specifically for use with Kearney® crimping dies that are used by many power utility companies. “We developed these two new tools to meet the needs of power utility companies who exclusively use Kearney® “O” type crimping dies in their systems, and some companies that use both Kearney® ”O” and Burndy® “W” dies,” said Jim Eisele, senior product manager. “Greenlee now has a manual tool to meet their needs for a durable, easy-to-use service entrance type crimping tool.” [Press Release]

462B Dark Cutting/Threading Oil -

Greenlee now offers field ready Dark Cutting/Threading Oil in a convenient, toolbox size, shatterproof, 8oz. dispensing bottle with an integral leakproof cap. Contractors who carry this cutting oil in their toolbox will experience faster cutting time and longer life for drill bits, holesaws, drill/taps and hole cutters when working with mild steel, stainless steel, copper and aluminum. [Press Release]

Metric/Standard Drill/Tap Bit Kits -

Greenlee’s Combination Drill/Tap Bits go metric. The new metric Drill/Tap is a combination drill bit that allows the end-user to drill, tap and countersink a metric hole in one motion, just as Greenlee’s standard Combination Drill/Tap already does. This new product can be used by electrical, HVAC, plumbing, automotive and DIY end-users that need tapped metric holes in material 10 gauge or less. Greenlee is also introducing two new larger standard size Drill/Tap bits (5/16) and (3/8) to meet end-user needs when it comes to heavier metal construction. [Press Release]

ESC85 Battery-Powered Cable Cutter -

Greenlee’s newest battery-powered cable cutter, the ESC85 makes the task of cutting large diameter cables, up to 3 ¼” in diameter, fast, safe and easy for power utility underground crews, utility contractor underground crews, and telephone company OSP crews . Electrical contractors that need to cut large diameter cables will also want this cutter. [Press Release]

TK-30 Electrical Kit -

Greenlee is proud to announce the addition of the TK-30 Basic Electrical Kit.  The TK-30 Basic Electrical Kit includes three core products - the DM-20 manual ranging multimeter, the GT-10 polarity cube and the popular GT-11 non-contact voltage detector.  To many electrical workers these three test instruments are a standard part of the tool bag.  So why not put them together in one kit! [Press Release]

DM-300 Series Digital Multimeters -

Greenlee extends its already broad breadth of multimeters with the introduction of its new DM-300 series.  These four new multimeters provide electricians with affordably priced auto-ranging TRMS and averaging multimeters that can be used in a variety of applications.  The DM-300 series, which includes the DM-300, DM-310, DM-330 and DM-350, all have a UL safety category rating of Category IV 600V and Category III 1000V. [Press Release]

GT-65, GT-95 Voltage Testers -

Greenlee introduces its new GT-65 and GT-95 voltage testers, designed with four new features that takes one of the most commonly used electrician tools and made it faster, safer and easier. The new GT-95 and GT-65 voltage and continuity testers feature auto-hold, EF, self-check and over-voltage warning. Both models have UL safety category ratings of Category IV 600V and Category III 1000V. [Press Release]

PDMM-20 Pocket Multimeter -

Take an inventory of the items in your pocket, a pen, pencil, non-contact voltage detector and now a PDMM-20 pocket multimeter. Greenlee's new PDMM-20 is an autofunction, low impedance multimeter designed with a safety rating of Category III 300V and with its autoranging function that provides hassle free automatic measurement of voltage and resistance. [Press Release]

DM-20, DM-40, DM-60 – Three New Manual Ranging Multimeters -

The DM-20, DM-40 and DM-60 give you three more reasons to add a Greenlee tester to your tool portfolio. Manual ranging multimeters are used in many everyday electrical applications where the electrician does not require extended features or high accuracy. Measurement capabilities for the DM-20, DM-40 and DM-60 include: AC and DC voltage, DC current, temperature (K-type thermocouples only), and resistance. Other capabilities include checking diodes, verifying continuity, and testing 1.5V and 9V batteries. [Press Release]

8600 EMT Conduit Cutter -

The new Greenlee 8600 Conduit Cutter eliminates the need to debur the inside of conduit after it is cut.  Although the 8600 may look like other tubing cutters, it has a unique patented cutting wheel with a shoulder that prevents it from cutting completely through the conduit wall. [Press Release]

XFC Series of F-Style Compression Connectors and the 60807 Compression Crimping Tool -

The new Greenlee XFC Series of F-Style Compression Connectors and the 60807 Compression Crimping Tool are the perfect combination for weatherproof coax terminations.  The combination of weatherproof compression connectors and crimping tool has become a popular solution for CATV, Digital Satellite, Security and Residential structured wiring installations. [Press Release]

CM-330 Clamp-on Meter -

Greenlee’s newest addition to the test and measurement family, the CM-330 clamp-on meter, is designed for taking basic AC amperage measurements. It has the capability of measuring up to 400 amps AC and has a Category III 600V safety rating per UL 61010B-1. [Press Release]

PairMapper® Twisted Pair Wire Map Tester -

Greenlee now offers a new and improved PM-400K PairMapper® Kit, a wiremap tool designed to aid network installation and maintenance personnel in the quick and easy verification of voice and data networks. The PairMapper® is a compact, low cost tester used to identify various wiring faults found in 4-pair twisted pair (UTP or STP) cables. [Press Release]

12', 18' and 24' Fish Poles -

Greenlee introduces three new products designed specifically for pushing and pulling wire, especially electrical or voice-data-video wires, over long distances such as suspended ceilings, sub-floors, crawl spaces and attics in residential and commercial applications. The Greenlee 02268 12-foot, 10442 18-foot and 10443 24-foot Fish Poles are lightweight in design and made of a durable material for long-term use. Both poles feature a specialized hook that can be used specifically to install wires in suspended ceilings. [Press Release]